Product List

Products - A Brief Description

  • Inverter

    Inverter is a system, widely used in domestic domains, which provides back up power for the time when mains is not present. It takes DC from battery and converts it into AC & provides it to the household circuit, when mains are not present. But when mains are present it does the reverse, i.e. it takes power from mains AC, converts it into DC and charges the connected battery.

    Features:
    > Advanced digital mosfet technology and elegant design features.
    > Audio signal on power failure overload and low battery.
    > Visual indications for mains present, charge on.
    > Inverter on and System cut-off.
    > Protection on over load, short circuit, Battery deep discharge and
    > Battery over charge.
    > Instant surge load bearing capacity
    > Auto restart facility on over load and low battery.
    > Auto bye-pass facility of input electricity.
    > Highly efficient power management systems.
    > PCB mountable cube relays for better performance.
    > 100 % efficiency of indicated capacity assured.

    Technical Specification:

    TECHNICAL SPECIFICATIONS
    VA Rating 300VA to 10K VA
    Input voltage 60-270V
    Input DC voltage 12V, 24V to 180V
    Output voltage on mains Same as input
    Output Voltage on inverter 220V+15%
    Output frequency on inverter 50 Hz + 2Hz
    Charging current 3 A to 6 A
    Charging mode Primary Current Controlled
    Output wave form on inverter Quasi Square / Sine wave
    Inverter efficiency 90% Approx


  • SINE WAVE INVERTER

    Features:
    > DSP based controller technology.
    > Pure SINE WAVE output.
    > Cold start capability to run Inductive loads.
    > Noiseless operation with all types of load.
    > Computer compatible.
    > SMPS type of charger for enhanced battery life and more back-up with improved input power factor (>0.8) and thus reduction in Electricity bill.
    > Can use either WET or GEL type of battery.
    > User friendly AUDIO visual indications for different status.
    > Plug 'N' Play type PCB design for easiness of service.

    Technical Specification:

    TECHNICAL SPECIFICATIONS
    Capacity 500VA to 30 KVA
    Input AC voltage 120V-285V
    Input DC voltage 12V, 24V to 360V
    Output voltage on mains Same as input
    Output Voltage on inverter 220V+15%
    Output frequency on inverter 50 Hz + 0.1Hz %
    Charging current 4 A to 10 A
    Charging mode Multi Stage / Constant current
    Output wave form on inverter Pure Sine wave
    Charger type SMPS
  • SERVO STABILIZER

    Stabilizers are an effective solution to voltage fluctuation problems. They are designed to current a wide range of Input Fluctuations to maintain specified output voltage. The output voltage waveform is completely distortion free and the regulation is unaffected by the load power factor.

    Features:
    > Over - Under Voltage Protection
    > Over - Under Voltage Cut-off Protection
    > Overload / Short Circuit protection
    > High Efficiency
    > Auto - Manual Operation Facility
    > Single Phase Prevention.
    > Special Input/output ranges available on request.

    Technical Specification:

    PARTICULARS SINGLE PHASE THREE PHASE
    Capacities 1KVA to 50KVA 3KVA to 1000KVA
    Input Voltage Range
    Normal Wide    		 170V to 270V
    140V to 270V    		 295V to 465V
    245V to 465V
    Output Voltage 220V /230V/240V 380V /400V/415V
    Regulation +/- 1% +/- 1%
    Efficiency >96% >96%
    Input Frequency 50 Hz +/- 3Hz 50 Hz +/- 3Hz
    Wave Form Same as Input Same as Input
    Effect of Power Factor Nil Nil
    Motor Drive Heave duty AC Synchronous Motor Heave duty Synchronous Motor
    Metering Analog Voltmeter to Read
    Input & Output Voltage
    With Selector Switch    		 Analog Voltmeter to read
    Input Voltage with Selector
    Switch, Analog Voltmeter to read Output Voltage with
    Selector Switch, Analog Current meter for above 50KVA.
    Rate of Correction 35V/Sec or up to 105V/Sec 35V/Sec or up to 105V/Sec
    Operating Temperature 0-45˚C 0-45˚C
    Duty Cycle Continuous Continuous
    Nature of Cooling Air Cooled / Oil Cooled Air Cooled / Oil Cooled
    Protection Low Voltage Cut Off
    High Voltage Cut Off    		 Low Voltage Cut Off
    High Voltage Cut Off
    Stabilizer Standard As per IS 9815 As per IS 9815
    Oil Standard As per IS 335 As per IS 335
    • BATTERY

      Battery is one or more electrochemical cells that convert stored chemical energy into electrical energy. Batteries have become a widely used common power source for many household and industrial applications now-a-days.

      Features:
      > Easy charging
      > Extended life

      • CVT

        The CVT (ferro) uses the unique principle of ferroresonance: operation of a transformer in the region of magnetic saturation which results in instantaneous Voltage regulation. No effect of input transient and spikes on the output. Sinusoidal output waveform. A perfect answer and remedy for all types of electronic equipment.

        Features:
        > Very high voltage correction speed
        > Very high isolation between input and output
        > No-loss of output supply for line loss up to 30 milliseconds
        > BUILT-IN VOLTMETER provided to continuously monitor the output voltage
        > Built-in inherent protection against UNDER-VOLTAGE, OVER-VOLTAGE & OVER-LOAD
        > Silent, Sleek, Compact, light weight, aesthetic design for desk top use

        • AVR

          The automatic voltage regulator or AVR, as the name implies, is a device intended to regulate voltage automatically: that is to take a varying voltage level and turn it into a constant voltage level.

          > Output voltage regulation is good
          > Ultrafast voltage correction speed
          > No restrictions on the number of correction cycles
          > Versatility of KVA rating, voltage and configuration
          > Very low or no regular maintenance
          > Good line isolation

        • Service:

          What we do:

          Before Sale After Sale
          • Site and load Study Installation
          • Selection of products / solution Installation of the unit at the site will be done by SASPOW
          • Power requirements and Product requirement Training
          • Cabling / Electrical requirement • Product Usage
          • Statutory regulations • Preventive Measures
          • Commercial clarifications and Budgetary quotes • Product Maintenance
            • Trouble Shooting
            Service
            • 24x7 customer support
        • Free Services:

          ONLINE-UPS:

          Maintenance services once in 2 months (free for a year)


          INVERTER:

          3 maintenance services for one year (free for a year)

          *The services will be charged after one year.*

          Up gradation of existing products:
          Latest technology upgrades can be done with the help of SASPOW engineers and it is subjected to the deal made with the customers.